Shanghai Shengran Insulating Materials Limited

2007/

homepage
about us
collection
set homepage

Type	Chemical Basis	Diameter （mm）	Main properties	Solids Content (2g1h180℃)	Viscosity 30min (mpa.s,23℃)	Viscosity (s,T4#30℃)	Thermal Index
SSIM145	Polyure-thane	0.02-0.65	Goodrunnability,suitable for slight fine wire,excellent pin hole resistance,375℃ solderble	28±1%		17-23	F
				35±1%	200-450
SSIM155	Polyure-thane	0.10-1.20	High speed,high thermal class,pinhole free,375℃ solderble	25±1%		22-30	H
				28±1%		35-50
				33±1%	500-900
SSIM225	Polyester	0.10-3.00	High thetmal class,excellent pinhole resistance,easy application.	30±1%	200-450		F
				35±1%	550-1000
				38±1%	1100-1500
SSIM258	THEIC modified Polyester	0.04-2.50	High thetmalclass,good runnability & surface	30±1%	200-450		C
				36±1%	650-1100
				39±1%	1100-1850
SSIM338	Polyamide-imide	0.05-3.00	Used as top coat,also as single coat,easy runnability	21±1%		20-30	C
				33±1%	600-800
				35±1%	900-1300
SSIM406	Polyimide Enamel	0.02-2.50	Has good electrical and solvent resistance properties	15±1%		40-60	C
				20±1%		120-200
SSIM533	THEIC modifred Polyes-terimide	0.08-3.50	High speed、good runnability、good surface	30±1%		40-50	H
				36±1%	600-800
				40±1%	800-1300
SSIM588	THEIC modifred Polyes-terimide	0.06-3.50	General purpose、good surface、high cut-through、superior hert shock、pinhole	27±1%		35-45	C
				36±1%	600-800
				40±1%	800-1300
				45±1%	2000-2500
SSIM606	Nylon Enamels	0.02-2.00	Generalpurpose,selflubricated	7%		20-40	B
				15%		100-200
SSIM766	Polyurethane Enamels	0.40-5.00	General purpose,lubricated	20%		850-1150	E